drop and 20's

[rudeboi]

can i please have pictures of a 3/5 drop and a 2/4 drop oon 20's with tire and kit recommendations thanks

[Pblackmon]

My sig has a 3/5 with 20s. 255/35/20 tires and DJM controlarms and shackle & hanger kit

[rudeboi]

pblackmon hows the ride and how hard was it to install

[00dakota]

This was truck about 11/2 ago 3/4 on 20's with 275/45 rubber.Absolutly loved the way it sat.I had 3in block in the rear and the load leaf and aleaf spring removed,front was three inch springs that sagged alil over 3in(about 31/4-31/2).Main thing is that the front and rear bumpstops need to be shortiend or itl ride like shit.Difficulty ona 1-5 scale would call it a 3,mainly cause of the balljoints and rusty bolts.Shocks also determin ride quality,i originaly had beltech nitro drop2 shocks all the way around,they were soft but resposive to handleing,very smooth ride.Thn i had toxics up front for my second drop much firmer a ride was rougher(was not used with the 20's).Im not sure of any other brands except those 2.On tires i would do 40series cause up front gap was so tight i could barely get a finger between the tire and the fender.


this is a pic of the how the rear was setup
http://i76.photobucket.com/albums/j2...s/Truck001.jpg

[rudeboi]

Originally Posted by 00dakota

This was truck about 11/2 ago 3/4 on 20's with 275/45 rubber.Absolutly loved the way it sat.I had 3in block in the rear and the load leaf and aleaf spring removed,front was three inch springs that sagged alil over 3in(about 31/4-31/2).Main thing is that the front and rear bumpstops need to be shortiend or itl ride like shit.Difficulty ona 1-5 scale would call it a 3,mainly cause of the balljoints and rusty bolts.Shocks also determin ride quality,i originaly had beltech nitro drop2 shocks all the way around,they were soft but resposive to handleing,very smooth ride.Thn i had toxics up front for my second drop much firmer a ride was rougher(was not used with the 20's).Im not sure of any other brands except those 2.On tires i would do 40series cause up front gap was so tight i could barely get a finger between the tire and the fender.


this is a pic of the how the rear was setup
http://i76.photobucket.com/albums/j2...s/Truck001.jpg

did u grind the bump stops or get aftermarket ones and did it rub or bottom out on bumps?
and what was the drop in back with the leafs removed and the blocks

[Twisted93dak]

Originally Posted by 00dakota

This was truck about 11/2 ago 3/4 on 20's with 275/45 rubber.Absolutly loved the way it sat.I had 3in block in the rear and the load leaf and aleaf spring removed,front was three inch springs that sagged alil over 3in(about 31/4-31/2).Main thing is that the front and rear bumpstops need to be shortiend or itl ride like shit.Difficulty ona 1-5 scale would call it a 3,mainly cause of the balljoints and rusty bolts.Shocks also determin ride quality,i originaly had beltech nitro drop2 shocks all the way around,they were soft but resposive to handleing,very smooth ride.Thn i had toxics up front for my second drop much firmer a ride was rougher(was not used with the 20's).Im not sure of any other brands except those 2.On tires i would do 40series cause up front gap was so tight i could barely get a finger between the tire and the fender.


this is a pic of the how the rear was setup
http://i76.photobucket.com/albums/j2...s/Truck001.jpg

my buddy has those same rims, they look badass with a blue

[00dakota]

Rear never bottemed out and i cut the bumpstops then shaved them to make a "V"shape again in the rear.Front i just cut down,did bottem out occasionaly but wasnt uncomfortable.Also front did rub if you hit a bump/pothole hard.rear was a 4in drop and it sat just about level.Also in the front the plastic inner fenders should be removed or youl rub them all the time

[hawaiianice99]

I dont mean to hijack this thread, just add to it. does anyone have any pics of 2/3 drops on 20's?

[dakota209]

do they even make a 3/5 drop for my 2004 dakota??

[lilbrucie]

Yea man they make a 3/5 drop. Ask lofnkota he'll hook you up with some stylintrucks stuff