I wanna drop but idk if i can

[lscustoms]

I wanna drop my truck but, its a 4x4.. i love the stance cuz it has a mean swagger from the back.... looks nice on the track and sticks good... but it need alil drop i wanna bagg it but i dnt think that would be possible... this is a side pix of it now... and a rear shot also so u can see the stance....

[DRAGN94]

you can bag a 4x4..takes alot of work and one-off parts (not to mention the transfer case and trans hang low.

fabbed arms would need to be made since the kmember is different. (especially if you wanna keep the 4WD)[you would not lay out but would be dam close]

as for a drop they sell drop torsion keys..it offsets your factory torsion key and allows to sit lower in front while keeping spring rates for the rear just flip the axle to a leaf under axle and weld a new perch on (posibly have to cut the bump stop off the frame and/or bolt in c-notch] If you want cheap for the front if drop keys are not avail for a dodge than you could just loosen the set screw on the keys (located under the cab at the rear of the torsion bars) only issue with this is your front will ride really soft and wander when you hit bumps

hope that helps some