Customdakotas.com - i need a 4 link to buy asap dont want to look at all the options

wayneb2510 · 10-11-2008, 09:13 PM

i just need a few links from the guys in here that have bought and installed. i want something simple i can setup and be done with this my intentions are just to bag the rear for now. for a week or so i just got my 4 post lift setup again at new house and i want to do something with this money i have saved to do this the bed has been removed and i just dont see any 4 links i like want to but them by the end of this weekend or monday at the latest the small town cops dont like the bedless truck driving around nor do i i have zero weight on axle lol spin happy on the tires

and drop the front i know im going to buy upper and lower control arms if i could find where i had priced them and the bag cups cause i im going to keep my r/t wheels till i find some 20 r/t remakes

djwolf37 · 10-11-2008, 11:02 PM

I like the plain universal kit from gravitywerx (same one sdoor sells). cant get any more simple, the only problem is it will take a week or two for you to get it. If your looking for something fast, racing 4links tend to ship faster. they are more involved since they are so adjustable. try autofab, chassisworks, chassisengineering.

for the front do you need to know if you need arms or what arms you need?

wayneb2510 · 10-12-2008, 09:43 AM

Quote:

Originally Posted by djwolf37

I like the plain universal kit from gravitywerx (same one sdoor sells). cant get any more simple, the only problem is it will take a week or two for you to get it. If your looking for something fast, racing 4links tend to ship faster. they are more involved since they are so adjustable. try autofab, chassisworks, chassisengineering.

for the front do you need to know if you need arms or what arms you need?

well i had found chassi tech arms for like 600 for a set brand new and i know i want arms b/c my alignment sucks as it is but thanks for that site i im going to go with this link setup. jsut b/c bag mounts are there and makes it simple i think and then just set it up triangulated. i have done a race setup on a 69 chevell SS true parelle

Universal Mega Lift 4 Link Kit - UMLFLKIT

DRAGN94 · 10-12-2008, 11:20 AM

Quote:

Originally Posted by wayneb2510

well i had found chassi tech arms for like 600 for a set brand new and i know i want arms b/c my alignment sucks as it is but thanks for that site i im going to go with this link setup. jsut b/c bag mounts are there and makes it simple i think and then just set it up triangulated. i have done a race setup on a 69 chevell SS true parelle

Universal Mega Lift 4 Link Kit - UMLFLKIT

wow you are obviously new this...chassis tech is the worst company and parts ever. all their shit breaks. and its cheaply made. thats y its so god dam cheap! use quality company's like cando specialteis, suicide doors, gravity werx..you pay a lil more but they are built right!

wayneb2510 · 10-12-2008, 02:35 PM

ok noted yea i know im new to this low truck thing.my old 4x4 has been broken into so many times im jsut going to scrap the chassi and keep motor and tranny maybe the 1000 dollar tires. i couldnt afford gas to drive it to any decent places to go have fun so im going to do my dakota like i always have wanted

bsminitruckin · 10-12-2008, 03:47 PM

i can build a 4-link quickly even if you want bends, round tubing, box tubing etc..

Slmdslt · 10-12-2008, 06:16 PM

I got my kit from gravitywerx and love it. as long as you can weld and pick up an angle finder you'll be golden.

wayneb2510 · 10-12-2008, 08:48 PM

Quote:

Originally Posted by Slmdslt

I got my kit from gravitywerx and love it. as long as you can weld and pick up an angle finder you'll be golden.

what kit did you buy? i gotta cut this short football is on
i have all kinds of angle finders i work as a maintence tech in a hydraulic shop have my own medium sized 220 volt mig and a small 110 mig machine and a few very large lol 1/8 wire welders i want to put bags on links but think that might be for a latter project might just be easier to plant them on axle for now the truck rides like ass as it is

mydak · 10-13-2008, 05:33 AM

DAMN. I wish all of this welding talent was closer! I want to fab stuff for mine, but don't want someone that is in it for the money doing it. Would rather another truck enthusiast have at it.

Rooknute · 10-13-2008, 10:34 AM

Just call the guys over at chassis engineering and be done with it!!

Yea, you might pay a bit more, but seriously who cares! You're going to get a setup thats top notch and won't bend or break like some other shit on the market!

I'll be honest, I didnt read your post, are you looking for a 4-link and coil over setup, or a rear bag setup? Eitherway, call them!