Quick 4wd Question

[Xtrakrunk]

I have a 2000 Dodge Dak.. 4.7 v8 4WD..
Ok my 4wd shifter's not bolted to the actual leaver to shift the different drives.. Would anyone know what kind of nut or clamp goes on the rod to connect it back...

THanks Blake.

[Alta Boy]

There are rubber grommets for the transfer case shift rod at the lever end and on the transfer case shift lever that bolts to the side of your transfer case. The shift rod is held in place on one end by a 90 degree bend on the shift rod, a flat washer and a small hitch pin. On the other end it has a similar set up with one exception. A block with a pin that slides over the rod with a bolt on the side of the block to allow some adjustability of the linkage and permit positioning of the transfer case shift lever. If memory serves me right the bolt is a 7 or 8mm.