Dodge Dakota Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
150 Posts
You could do a 2/4 for pretty cheap. Get some 2" lowering springs up front (approx $150-200) and a 4" block out back. It isn't going to ride too smooth. If you don't care about ride, just cut off a coil in the front to save you the money. Just don't cut off too many coils.
 

· Registered
Joined
·
150 Posts
You shouldn't have to, but you might want to. The shocks might bottom out when you hit a dip at speed. You will also have to trim down the bumpstops.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top