Dodge Dakota Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
17 Posts
Are you talking about the rear DJM 5'' hanger kit. To remove the factory hangers that are 4 thick ass rivets per hanger. Have fun with those, cutoff wheel and air chisel are the best method! To remove the Leaf spring you will need a good t50 or T55 torx bit (Cant remember exactly) 1/2 inch drive and a breaker bar. I had one of the leafspring bushings strip out on me. Good luck trying to get a new one of those even through the dealership! Make sure you got a good torx bit, proper size and whatever you do dont strip it out.
Also The driver side front hanger is going to be quite the pain in the rear due to the gas tank. I remember having to drop my gas tank.
Got some pictures let me know if you need them

 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top