here it is, they take your stock axles out and send them to moser.... you can either have your stock axles shortened /resplined... or you can buy new axles from them.... I am buying new ones because I have a V8 and I want the strongest rear set up possible so i can still put my foot on the gas and not worry..... then moser sends your axles back to the shop, at the shop they cut down your axle housing and then re-square it.... then put your new axles in and call it a day !
heres the site http://www.moserengineering.com/
there should be absolutely no difference wether its a dakota or not.... you need to clarify to the shop that you just want your housing shortend! the axels themselves will come from moser..... some shops might be thinking that you want them to shorten both the housing and the axle.
I am taking it to a shop in richmond VA...
there are ones in VA, North carolina, fredricksburg VA, and Maryland. Im sure someone out there can do it...... lata
well.... from what I was told by the shop, is that they have to "re-square it"... no clue what that means haha.... but it seems to be a very simple process. I dont know why dakota owners arn't getting this done..... I'll let you know when mine is finished
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.