Dodge Dakota Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter · #1 ·
Just wondering if you guys had to shorten the endlinks on bagged or slammed Daks? Im lowering my R/T 4/5 and someone suggested cutting the endlinks 2" and rewelding so that the wheel/rim doesnt come in contact with the swaybar in sharp turns.
 

·
Registered
Joined
·
108 Posts
um....... hes lowering it. Not baggin it.

4/5 will work fine with the endlinks you have now
 

·
Registered
Joined
·
224 Posts
Mines dropped and I didn't remove or cut anything. And it was pretty low. I might have had a few inches of groung clearance with those screwed up DJM control arms.
 
1 - 6 of 6 Posts
Top